Balluff / Sensors
BES05ZW
BES M12EG1-L01C80F-S04G-L04Balluff BES05ZW — Inductive proximity sensors. Special characteristics: Washdown Plus / Washdown. Dimensions: Ø 12 x 65 mm. Model: M12x1. Mounting: non-flush.
Technical essentials
- Mounting
- non-flush
- Interface
- IO-Link 1.1
- Switching output
- PNP/NPN/push-pull Normally open/closed contact (NO/NC);Push-pull Normally open/closed contact (NO/NC)
- Connection
- Connector, male connector M12x1, 4 pins
- Operating voltage Ub
- 10...30 VDC
Source consulted on 2026-10-20 Confirm family-level specifications for the selected variant.
| Special characteristics | Washdown Plus / Washdown |
| Dimensions | Ø 12 x 65 mm |
| Model | M12x1 |
| Mounting | non-flush |
| Sensing range | 1...8 mm |
| Interface | IO-Link 1.1 |
| Switching output | PNP/NPN/push-pull Normally open/closed contact (NO/NC);Push-pull Normally open/closed contact (NO/NC) |
| Switching frequency | 1000 Hz |
| Housing material | Stainless steel (1.4404) |
| Sensing face material | PBT |
| Connection | Connector, male connector M12x1, 4 pins |
| Operating voltage Ub | 10...30 VDC |
| Ambient temperature | -40...85 °C |
| IP rating | IP68, IP69K |
| Approval / compliance | CE / UKCA / cULus / WEEE / Ecolab |
| Secondary features | Identification / Device Discovery / Switching Profiles / Signal Quality Monitoring / External Signal Blanking / Signal Delay / Signal Speed Monitor / Switching Counter / Basic Statistics / Logic Blocks / Operating Hours Counter / Boot Cycle Counter / Voltage and Current Monitoring / Extreme Environment Status / Storage Usage Monitoring / Variant Configuration / Pin Assignment |
| Secondary features for condition monitoring | Vibration monitoring / Inclination monitoring and installation aid / Internal temperature monitoring / Internal humidity detection |
| Operating principle | Inductive sensor |
Manufacturer catalogue selection. Supply, prices, availability and configuration must be confirmed with APM.
Technical documents
Language and revision: see the manufacturer document.
Technical documents Balluff ↗Manufacturer CAD models ↗