CMATIC / Pneumatic fittings
AP20 10 38 PTFE
AP100053-PTFECMATIC AP20 10 38 PTFE — Swivelling T fitting, taper. Manufacturer code: AP100053-PTFE. Product family: AP20. CMATIC line: AP Line. Product type: Push-in Fittings.
Technical essentials
- Operating pressure
- -0,99/20 bar
Manufacturer verification date not recorded. Confirm family-level specifications for the selected variant.
| Manufacturer code | AP100053-PTFE |
| Product family | AP20 |
| CMATIC line | AP Line |
| Product type | Push-in Fittings |
| Operating temperature | -20/+80 °C |
| Operating pressure | -0,99/20 bar |
| Dimension OD1 | 10 |
| Dimension D1 | R3/8 |
| Dimension D2 | 16 |
| Dimension D2 (in) | .630 |
| Dimension D3 | 20 |
| Dimension D3 (in) | .787 |
| Dimension L1 | 11,5 |
| Dimension L1 (in) | .453 |
| Dimension L2 | 27 |
| Dimension L2 (in) | 1.063 |
| Dimension L3 | 52 |
| Dimension L3 (in) | 2.047 |
| Dimension H1 | 18 |
| Declared compliance | SILICONE FREE · RoHS · REACH · PTFE |
| Manufacturer applications | General pneumatic applications |
| Vacuum · line data | -99 KPa |
| Line recommendations | Recommended tubings: PA11, PA12, PA6, Polyethylene PE, Polyure- thane PU (98 Shore A). Acceptable Tolerances on the tubings: +/– 0,07 mm up to Ø 10 mm, +/– 0,1 mm from Ø 12 up to Ø 14 mm Application fields: Pneumatic circuits |
| Line component 1 | Body: Brass UNI EN 12164 CW614N – UNI EN 12165 CW617N Nickel Plated |
| Line component 2 | Release Ring: POM |
| Line component 3 | Holding Ring: POM |
| Line component 4 | Gripping ring: Stainless Steel AISI 301 |
| Line component 5 | Protection Ring: POM |
| Line component 6 | Seals: NBR |
Manufacturer catalogue selection. Supply, prices, availability and configuration must be confirmed with APM.
Technical documents
Language and revision: see the manufacturer document.
Technical documents CMATIC ↗Manufacturer CAD models ↗Official product page CMATIC ↗