CMATIC / Pneumatic fittings
HP18 06 M10x1
H0080630CMATIC HP18 06 M10x1 — Taper Swivelling Elbow Fitting, male. Manufacturer code: H0080630. Product family: HP18. CMATIC line: HP Line. Product type: Push-in Fittings.
Technical essentials
- Operating pressure
- 0/250 bar
Manufacturer verification date not recorded. Confirm family-level specifications for the selected variant.
| Manufacturer code | H0080630 |
| Product family | HP18 |
| CMATIC line | HP Line |
| Product type | Push-in Fittings |
| Operating temperature | -20/+80 °C |
| Operating pressure | 0/250 bar |
| Dimension OD1 | 6 |
| Dimension D1 | M10x1 |
| Dimension D2 | 11,5 |
| Dimension D2 (in) | .453 |
| Dimension L1 | 8 |
| Dimension L1 (in) | .315 |
| Dimension L2 | 25 |
| Dimension L2 (in) | .984 |
| Dimension L3 | 24 |
| Dimension L3 (in) | .945 |
| Dimension H1 | 11 |
| Declared compliance | SILICONE FREE · RoHS · REACH |
| Manufacturer applications | Lubrication |
| Line recommendations | Recommended tubings: PA6-6 (4x1,5 – 6x3), High pressure tubing with metal stem. Acceptable Tolerances on the tubings: +/– 0,07 mm up to Ø 6 mm. Application fields: Lubrication installations. The max pressure rate achievable can vary depending on the tubing used and on the room temperature. These two factors may in fact lower the tube bursting pressure. |
| Line component 1 | Body: Brass UNI EN 12164 CW614N – UNI EN 12165 CW617N Nickel Plated |
| Line component 2 | Threaded screws: Brass UNI EN 12164 CW614N Nickel Plated |
| Line component 3 | Gripping collet: Brass UNI EN 12164 CW614N |
| Line component 4 | Seals: NBR |
| Line component 5 | Seeger: C75 Steel zinc coated |
Manufacturer catalogue selection. Supply, prices, availability and configuration must be confirmed with APM.
Technical documents
Language and revision: see the manufacturer document.
Technical documents CMATIC ↗Manufacturer CAD models ↗Official product page CMATIC ↗