CMATIC / Pneumatic fittings
MP11 08 M10x1
M0010640CMATIC MP11 08 M10x1 — Taper Straight, male. Manufacturer code: M0010640. Product family: MP11. CMATIC line: MP Line. Product type: Push-in Fittings.
Technical essentials
- Operating pressure
- 0/80 bar
Manufacturer verification date not recorded. Confirm family-level specifications for the selected variant.
| Manufacturer code | M0010640 |
| Product family | MP11 |
| CMATIC line | MP Line |
| Product type | Push-in Fittings |
| Operating temperature | -20/+80 °C |
| Operating pressure | 0/80 bar |
| Dimension OD1 | 8 |
| Dimension D1 | M10x1 |
| Dimension D2 | 13,8 |
| Dimension D2 (in) | .543 |
| Dimension L1 | 8 |
| Dimension L1 (in) | .315 |
| Dimension L2 | 25,5 |
| Dimension L2 (in) | 1.004 |
| Dimension H1 | 14 |
| Dimension H2 | 5 |
| Declared compliance | SILICONE FREE · RoHS · REACH |
| Manufacturer applications | Lubrication |
| Line recommendations | Recommended tubings: PA6-6 (4x1,5 – 6x3), PA12 HR Acceptable Tolerances on the tubings: +/– 0,07 mm up to Ø 8 mm. Application fields: Lubrication installations. The max pressure rate achievable can vary depending on the tubing used and on the room temperature. These two factors may in fact lower the tube bursting pressure. |
| Line component 1 | Body: Brass UNI EN 12164 CW614N – UNI EN 12165 CW617N Nickel Plated |
| Line component 2 | Threaded Screws: Brass UNI EN 12164 CW614N Nickel Plated |
| Line component 3 | Gripping collet: Brass UNI EN 12164 CW614N |
| Line component 4 | Seals: NBR |
Manufacturer catalogue selection. Supply, prices, availability and configuration must be confirmed with APM.
Technical documents
Language and revision: see the manufacturer document.
Technical documents CMATIC ↗Manufacturer CAD models ↗Official product page CMATIC ↗